Tag: GNSS

CVX600A Ruggedized Millimeter Accuracy GNSS Antenna

Written by EAD Admin on 27th October 2023. Posted in GNSS Antennas.

The CVX600A Ruggedized Millimeter Accuracy antenna from Harxon is designed with a ruggedized enclosure that allows the antenna to be used in high shock and vibration environments. HX-CVX600A provides millimeter level accuracy with the advanced filtering capabilities and robust signal tracking. It is ideal for all surveying and I-construction machining applications.

The HX-CVX600A has a compact design, and is built into a rugged IP69K rating housing with and independent aerodynamic enclosure. A standard TNC female connector with anti-collision cap design ensures optimal reliability in challenging environments.

For more information on this antenna for your application, download the datasheet or please contact us.

Also check out the lightweight multi-constellation helix antenna, the HX-CH6601A.

HX-CHX602A GNSS foldable multi-constellation helix antenna

Written by EAD Admin on 16th October 2023. Posted in GNSS Antennas.

The HX-CHX602A GNSS foldable antenna from Harxon is a multi-constellation full frequency high gain geodetic surveying antenna. This small form factor antenna employs a foldable design that allows a maximum of 90 degree bending angle for superior GNSS signal availability while integrated with surveying terminals, pads and consoles in the field. Its high sensitivity, low power consumption, small dimensions, flexible angle of signal reception make it a great match for geodetic surveying applications.

This antenna offers full support for reliable and consistent satellite signals tracking, including GPS, GLONASS, Galileo and BeiDou, as well as L-Band. It also exhibits a very stable phase center by adopting multipoint feeding technology, exceptional low elevation satellite tracking with symmetric radiation patterns, high gain with ultralow signal loss, as well as outstanding wide-angle circular polarization (WACP) ensures remarkable positioning accuracy.

The HX-CHX602A GNSS foldable antenna adopts a rugged small form factor foldable design that allows a maximum of 90 degree bending angle, providing the most flexible GNSS signal reception angle for robust signal availability of the surveying control terminals.

For a very small compact multi-constellation antenna, check out the Harxon HX-CH7609A.

HX-CHX600A Multi-constellation lightweight helix antenna

Written by EAD Admin on 14th October 2023. Posted in GNSS Antennas.

The HX-CHX600A Multi-constellation lightweight helix antenna from Harxon is designed for high precision positioning and offers superior satellite signal tracking, including GPS, GLONASS, GALILEO and Beidou as well as L-Band correction service. Its RTK level positioning accuracy makes it ideal to be integrated into application as surveying and mapping, and various UAVs operations.

Harxon’s D-QHA technology ensures more stable performance of wide-angle circular polarization (WACP), and smaller antenna phase center deviation (PCV), which ensures a more precise positioning accuracy.

Strong anti-interference performance through a LNA that features an excellent out-of-band rejection performance, which can suppress the electromagnetic interference, providing stability and reliability of GNSS signals.

The compact dimensions of the HX-CHX600A Multi-constellation lightweight helix antenna of 40×82.6mm (dxh) do not compromise it superior signal tracking capabilities.

HX-CH7609A Helix Antenna for UAVs and Surveying

Written by EAD Admin on 14th October 2023. Posted in GNSS Antennas.

The HX-CH7609A helix antenna from Harxon is a high performance GNSS antenna designed for high precision positioning applications and offers superior satellite signal tracking, including GPS, GLONASS, GALILEO, BeiDou, as well as L-Band correction service. Ideal for applications as surveying and mapping, and various UAV deployments.

Despite weighing only 30.5g and with compact dimensions of 43.6×40.8mm (dxh), the HX-CH7609A helix antenna offers a high gain and high accuracy solution and is an easy solution to integrate into many precision positioning projects.

The HX-CH7609A adopts advanced circuit layout and a robust pre-filtered LNA that features an excellent out-of-band interference rejection performance and inhibits possible unwanted electromagnetic interference.

QAD – Six Port 5G antenna Trooper II from PCTEL introduced

Written by EAD Admin on 26th October 2021. Posted in News.

The Trooper II Six Port 5G antenna from PCTEL has been introduced. This antenna is compatible with the leading 5G OEM routers, featuring six high-efficiency 5G FR1 antenna elements that deliver fast and reliable connectivity for voice, video, and data transmissions. It also contains PCTEL’s proprietary high-rejection, multi-constellation GNSS L1 L2 L5technology for high precision location tracking

With excellent RF performance, low profile form factor and slim footprint, it is ideal for industrial IoT, intelligent transportation, public safety and enterprise applications.

Check out the Trooper II product page here.

For more information on the Trooper II Six Port 5G antenna, pricing and availability, please contact us.

AllDisc Combi GNSS LTE dual WiFi low profile antenna

Written by EAD Admin on 22nd July 2020. Posted in 5G/4G/Cellular Antennas, GNSS Antennas.

The AllDisc Combi GNSS MIMO-WiFi antenna is 5G ready and a low profile solution with durable design. This antenna is ground plane independent and enables flexible and easy deployments. It is perfect for M2M applications such as fleet management, track and trace and smart metering.

It offers one 4G/LTE/5G element, one active GNSS element and two WiFi elements inside the robust, stud-mounted radome. With dimensions on 138 mm in diameter and 55mm in height, this AllDisc Combi GNSS antenna is a compact solution for a multi-element product whilst offering exceptional RF performance.

Ideal for roof-mounted, enclosure-mounted or indeed bracket-mounted applications, the AllDisc from Smarteq has excellent build quality and is well-suited to continuous outdoor deployment thanks to it IP6K9K design.

There is a LTE only version of this antenna, the AllDisc.

A selection of Smarteq antennas can be purchased via the Connex webshop.

HX-CH6601A GNSS active helix antenna now in stock

Written by EAD Admin on 9th June 2020. Posted in News.

The HX-CH6601A GNSS active helix antenna from Harxon is now in stock in the UK for purchase. Receiving signals from GPS L1, L2, GLONASS L1, L2 and Galileo constellations, it is lightweight, high performing antenna solution.

With an integrated LNA offering effective gain of around 33 dB, the antenna weighs less than 25g and measures just 59mm in length and 27.5mm in diameter. The antenna is terminated in a SMA-Male connector.

The HX-CH6601A is ideal for UAV, GIS surveying and a number of precision positioning applications.

The HX-6601A GNSS active helix antenna can be purchased by European customers in small quantities via the Connex Webshop.

For more information, please contact us.

ECE 118-R compliant antennas for passenger vehicle applications

Written by EAD Admin on 12th February 2020. Posted in News.

ECE 118-R compliant antennas are now available from EAD for passenger vehicle applications. The ECE-R 118 is a directive which relates to the combustion behaviour of materials used in these applications.

The range of EAD low profile multi-port puck antennas, for example, the CMG– MIMO LTE + GNSS, CMO– MIMO LTE, CLWG – 1 x LTE, 1 x WiFi 1 x GNSSand C2LW MIMO LTE + WiFi as well as the ultra small Button LTE antenna can now be supplied with an ECE 118-R compliant cable.

Ideal for bus and transport applications where a durable, multi-port and compact antenna is required, our ECE 118-R antennas offer an effective answer to MIMO antenna requirements.

For more information and quotation of ECE 118-R antennas, please contact us.

L1 L2 L5 Antennas from EAD offer enhanced precision

Written by EAD Admin on 23rd October 2019. Posted in News.

Two L1 L2 L5 antennas introduced recently by EAD enable enhanced precision and accuracy in global GNSS tracking and timing applications.

The MP-RTK is a global GNSS magnetic mount puck antenna which is robust and low profile with an active antenna element. Ideal for mobile non-permanent tracking and positioning installations where permanent mount antennas are undesirable, the MP-RTK antenna is compact, durable and waterproof. It is fed by a 3M cable as standard which exits from the side of the unit and whilst terminated with a SMA-Male connector as standard, other connector terminations are possible. The MP-RTK antenna has an integrated LNA with approximately 37 dB effective gain for GPS L1, 36 dB effective gain for GPS L2 and 32 dB effective gain for GPS L5 thereby offering high gain performance.

The HIGAIN-RTK antenna is a high gain multi-constellation antenna for outdoor pole-mount deployment. This antennas mounts to poles with a 1-14 UNF thread. With effective gain of 41 dBi for GPS L1, GLONASS G1, GALILEO E2-L1-E1 and BEIDOU B1 and an effective gain of 39 dB for GPS L2, L5, GLONASS G2, GALILEO E5A, E5B, E6 and BEIDUO B2 and B3, the HIGAIN-RTK offers flexibility allowing the antenna to be installed some distance from the receiver using low loss cables.

For more information and quotations on our L1 L2 L5 antennas, please contact us.

MIMO LTE antenna platforms are not one size fits all

Written by EAD Admin on 18th October 2019. Posted in News.

In considering MIMO LTE antenna solutions for your application not all product offerings are equal. In addition, not all solutions will be suitable for your project.

A supplier with a range of many flavours of MIMO LTE antenna can greatly assist your quest for the best possible wireless deployment. This range should cover as a minimum blade antennas, low profile antennas, magnetic antennas and outdoor omni-directional and directional antennas.

A modular range of products allows the customer the choice to pick the correct product option. Take a low profile puck antenna for example, you may have the option of a MIMO LTE permanent mount puck antenna. This however might not quite meet your requirements, but the option of having such an antenna with an integrated WiFI element or an integrated GNSS element might be more suitable. Notwithstanding those options, it may be that you do not want to drill a hole in the skin of vehicle, cabinet or kiosk and a magnetic mount MIMO LTE antenna is preferable. In this case once again, the options of 2 x LTE, 2 x LTE + GNSS or 2 x LTE + WiFi are welcome to help you meet the requirements of your installation.

In terms outdoor MIMO antennas, a similar principle applies. Directional or omni-directional radiation patterns are important and how to mount the antenna, wall, pole or cabinet mount – a solution needs to be able to address these requirements. Also the possibility to marry these antennas with custom length low loss cables such as RF240 and RF400 rather that being offer a fixed length cable solution at 5M.

EAD is excellently placed to help you with this product options. Many of our antenna solutions are based on modular platforms meaning that we can mix and match radiating elements to deliver exactly the antenna our customers need. In addition, we have access to a broad portfolio of world-class products in our SAS product porfolio which augment and enhance our offerings. For one-off single unit requirements, many of our antennas can be purchased via our sister company’s webshop.

For distributor and reseller pricing and requests, please contact us directly.

Outstanding antenna portfolio covers multiple frequency bands

Written by EAD Admin on 9th October 2019. Posted in News.

EAD in partnership with leading world-class vendors of antenna products has constructed its SAS (Specialist Antenna Solutions) range, an outstanding antenna portfolio of over 6000 antenna and RF accessory solutions for a range of markets from 130 MHz to 6 GHz. This covers VHF, UHF, LTE, Cellular, GNSS, WiFi, 5G frequencies and beyond.

With market-leading innovative suppliers such as Sirio, Laird, PCTEL, Smarteq and Scan, EAD’s offering is unrivalled in terms of quality and RF performance.

Some recent portfolio highlights include:

Coach II – a unique high accuracy global GNSS including GPS L1, L2 and L5, LTE and WiFi Multiband low profile roof mount antenna

FlexMIMO – MIMO 2.4/5 GHz internal flexible PCB antenna

LTE Phantom MIMO – LTE MIMO roof mount low profile antenna

UHF5G – 4G/5G multiband marine omni-directional antenna

SMP-4G-MIMO – 4G/LTE MIMO Directional panel antenna

AllDisc – High Gain LTE low profile dome antenna

HGO-4G-LTE – High Gain 4G LTE Omni-directional outdoor antenna

All this alongside a broad range of antenna products including

VHF/UHF Helical and Whip Antennas

Fibreglass omni antennas from 150 to 6 GHz

VHF/UHF yagi antennas

Magnetic mount antennas – various frequencies including LTE and UHF i.e. 450 MHz

Wall-mount antennas

Marine antennas – including 4G, WiFi and UHF variants

Specialist GNSS antennas – including magnetic, timing and synchronisation variants for GPS, GLONASS, Galileo and Beidou

Surge Protection – contact us for our surge protection offering

Power Dividers – a range of 2-way, 4-way and 8-way splitters mostly for 4G and LTE frequency bands

RF Low Loss Cables

With the widest porfolio of antennas available across the UK and European markets, we are best placed to be able supply your project with the exact antenna that fits the technical specification. Coupled with custom RF coaxial cable terminations in-house, we can provide a comprehensive service based around quality, customisation and innovation.

Notwithstanding the above, we have our own range of EAD antennas that augment our offering so there are fewer voids in our portfolio than other suppliers.

We only show highlights of our outstanding antenna portfolio on our website. You can visit the manufacturers’ websites for full antenna catalogues or call us for further direction.

To discuss your specific antenna requirement, please feel free to contact us.

Coach II multi-constellation MIMO LTE WiFi antenna

Written by EAD Admin on 23rd September 2019. Posted in 5G/4G/Cellular Antennas, GNSS Antennas.

The Coach II multi-constellation GPS L1, L2, L5 MIMO LTE and WiFi antenna has been released by PCTel. Known as the GL125-DLTEMIMO, this antenna is an unrivalled solution for transportation applications requiring multi-constellation GNSS, MIMO LTE and MIMO WiFi within a single antenna radome.

Permanently mounted via a stud underneath, the GL125-DLTEMIMO offers the following features:

Global multi-GNSS compatibility: 1150-290 MHz (GPS L2/L5; GALILEO E5A/E5B/E6; GLONASS L2/L3; BEIDOU B2/B3); 1500-615 MHz (GPS L1; GALILEO E1; GLONASS L1; BEIDOU B1/B1-2)
Dual port 4G LTE / sub-6 GHz 5G NR
802.11ac WiFi / Bluetooth connectivity
AAR compliant for railway applications
IP67 rated design

The Coach II multi-constellation antenna is available now, please contact us for more details.

GL125-DLTEMIMO multiband antenna GNSS multiconstellation

Written by EAD Admin on 23rd September 2019. Posted in GNSS Antennas.

The GL125-DLTEMIMO multiband antenna (also known as the Coach II antenna) from PCTEL meets the stringent requirements of complex RF communication systems in transportation applications.

This antenna features two diversity 4G LTE elements that facilitate the high speed data transmissions needed in dense RF environments. The platform also incorporates dual band 802.11ac Wi-Fi MIMO connectivity with two Wi-Fi elements.It also includes a proprietary high-rejection, multi-constellation GNSS L1 L2 L5 element for high precision location tracking.

The full multi-GNSS availability includes global GNSS Systems: 1150-1290
MHz (GPS L2/L5; GALILEO E5A/E5B/E6; GLONASS L2/L3; BEIDOU B2/B3);
1500-1615 MHz (GPS L1; GALILEO E1; GLONASS L1; BEIDOU B1/B1-2).

This GL125-DLTEMIMO multiband antenna is IP67 compliant once mounted and is permanent mount via stud underneath through which the cables and connectors pass.

For pricing and availability, please contact us.

For a GPS L1 L2 magnetic antenna, check out PCTEL’s GPS-L1/L2-28Mag.

8111D-HR GNSS Magnetic High Rejection Tracking Antenna

Written by EAD Admin on 23rd August 2019. Posted in GNSS Antennas.

The 8111D-HR GNSS magnetic high rejection antenna from market-leading antenna vendor PCTEL is ideal for any global GNSS tracking application that requires an externally mounted antenna. PCTEL’s proprietary filtering design allows wideband coverage while achieving superior out-of-band rejection.

Mounted via integral magnets in the base, the 8111D-HR GNSS magnetic antenna is fully waterproof and designed for continuous outdoor deployment.

This antenna offers 26 dB LNA gain with exceptional filtering capabilities. Various cable lengths and connector configurations are possible. Please contact us for details, configurations and pricing.

For small quantities for European customers, the 8111D-HR can be purchased via the Connex webshop.

For a GNSS timing antenna, check out the GNSS1-TMG or the 8178D antennas both from leading manufacturer PCTEL.

LPO-4L four element MIMO LTE antenna

Written by EAD Admin on 13th December 2018. Posted in 5G & LTE/4G Antennas.

The LPO-4L is a four element MIMO LTE antenna designed for high speed 4 x 4 MIMO LTE applications where a single antenna with 4 separately fed broadband LTE elements is required. Based on the modular LPO antenna platform, the antenna is robust and designed for permanent mounting onto flat surfaces up to 13mm thickness. Once mounted the antenna is IP67 waterproof and can be used for fixed or mobile applications.

Offering 3/4 dBi gain across the LTE bands, the LPO-4L is an effective performer and with all 4 elements integrated in one unit helps reduce installation times for MIMO LTE deployments.

An option to have an active GNSS antenna inside the LPO-4L is also possible. This offers an active gain of 28 dB and separate SMA cable for the GNSS. This version is called the LPO-4LG.

The LPO-4L four element MIMO LTE antenna is based on the popular LPO antenna which has 2 x LTE, 2 x WiFi and 1 x GNSS. The standard LPO antenna can be purchased via the Connex Webshop for customers in Europe.

4 x 4 LTE MIMO antenna has arrived at EAD

Written by EAD Admin on 11th December 2018. Posted in News.

EAD is pleased to introduce a 4 x 4 LTE MIMO antenna for external fixed and mobile applications. Based on the innovative LPO antenna, this new platform has four broadband 690-2960 MHz elements co-existing inside one low profile radome. An active GPS/GLONASS antenna element can also be configured to reside alongside the 4 LTE elements.

For applications requiring high speed LTE making use of 4 x 4 MIMO functionality, the LPO-4L offers a compact and robust solution with each antenna element fed by a separate cable.

The LPO-4L is one of a number of LPO antenna configurations available including the standard LPO (2 x LTE, 2 WiFi + GNSS) and LPO-D4547 with 2 x 450 MHz elements.

For more information and pricing on the LPO-4L antenna, please contact us or your local EAD distributor.

The LPO-4L antenna can also be used with RF240 low loss cables to extend the installation.

The standard LPO can be purchased from the Connex webshop.

New high gain multi constellation GNSS antenna

Written by EAD Admin on 29th October 2018. Posted in News.

The new HIGAIN-RTK antenna from EAD is a high gain multi constellation GNSS antenna is designed for outdoor pipe-mounted positioning applications receiving signals from GPS L1, L2, L5, GLONASS G1, G2, Galileo and Beidou systems. With a typical effective gain of around 39-40 dB with LNA, the HIGAIN-RTK offers excellent performance in a discreet IP67 waterproof enclosure.

With a 1-14 UNF thread in the base of the antenna, it can be mounted onto threaded pipes and mounting poles or alternatively can be clamped to a mast. Used in conjunction with RF240 or RF400 cables, this antenna can be located some distance away from the receiver for maximum installation flexibility.

For more information on the HIGAIN-RTK, please visit the product page here or contact EAD or your local distributor for availability and pricing.

First units of MP-RTK L1/L2/L5 antenna available

Written by EAD Admin on 1st October 2018. Posted in News.

The first units of EAD’S new MP-RTK L1/L2/L5 antenna available have now been dispatched to our initial customers.

The MP-RTK is a magnetic mount puck antenna supporting the reception of multi-constellation signals including GPS L1, L2, L5, GLONASS G1, GLONASS G2 and BeiDou. Well-suited for high precision applications such as precision agriculture, the MP-RTK antennas offers a high gain, but compact antenna solution for mounting onto a metal surface such as a vehicle roof.

Fed by a RG174 cable and SMA-Male connector as standard, the MP-RTK antenna has high pull-strength magnets built into the base of the antenna.

For more information, availability and pricing, please contact us.

MP-RTK – Multiband High Precision GNSS Antenna

Written by EAD Admin on 13th September 2018. Posted in GPS & GNSS Antennas.

The MP-RTK multiband high precision GNSS antenna is a rugged low profile magnetic mount antenna operating in a multi constellation environment including GPS L1, GPS L2, GPS L5, Galileo,GLONASS and BeiDou.

Fed by a single RG174 cable for all frequencies, the MP-RTK antenna has an integrated LNA with approximately 37 dB effective gain for GPS L1, 36 dB effective gain for GPS L2 and 32 dB effective gain for GPS L5 thereby offering high gain performance.

With a strong magnetic in the base of the antenna, it is ideal for vehicle or non-permanent mounting applications offering a rapid and simple deployment for high precision positioning applications. It is also possible to supply the MP-RTK antenna with a permanent mounting option based on our CPx base enclosure.

For European customers, small quantities can be purchased via the Connex webshop. For larger quantities and customers outside Europe, please contact your local EAD distributor or us here in the UK for more information.

Multi Constellation Magnetic Antenna for RTK applications

Written by EAD Admin on 5th September 2018. Posted in News.

EAD is introducing a multi constellation magnetic antenna for RTK GNSS applications. The MP-RTK antenna is based on the popular MP (Magnetic Puck) platform and supports GPS L1, L2, L5, GLONASS 1, GLONASS 2, Beidou 1 and Beidou 2 frequencies.

Fed by a single RG174 cable for all frequencies, the MP-RTK antenna has an integrated LNA with approximately 37 dB gain thereby offering high gain performance. With a strong magnetic in the base of the antenna, it is ideal for vehicle or non-permanent mounting applications.

Alternatively, if required the MP-RTK antenna element could be housed in the CPx permanent mount enclosure when a through-hole mount solution is required.

For pricing and availability of the MP-RTK antenna, please contact us.

MP-2LG MIMO LTE GNSS Magnetic Antenna

Written by EAD Admin on 27th February 2018. Posted in 5G & LTE/4G Antennas, GPS & GNSS Antennas.

The MP-2L is a MIMO LTE GNSS Magnetic Antenna part of the EAD’s Magnetic Puck range. Based on the CPx antenna radome, the MP-2L is a low profile puck antenna with a high pull-strength magnet in the base of the antenna. This version has 2 x LTE antenna elements and an active GPS/GLONASS element making it ideal for mobile LTE applications to be installed on vehicle roofs and remote LTE-enabled systems such as wireless CCTV.

The MP-2LG MIMO LTE GNSS magnetic antenna is part of the MP Magnetic Puck antenna range including the MP-2L (2 x LTE) and the MP-LWG (1 x LTE, 1 x WiFi, 1 x GNSS).

A permanent mount version of this antenna is also available called the CMG.

MP-LWG – LTE WiFI GNSS magnetic mount antenna

Written by EAD Admin on 15th February 2018. Posted in 5G & LTE/4G Antennas, GPS & GNSS Antennas.

The MP-LWG is a LTE WiFI GNSS magnetic mount antenna designed for roof-mount and outdoor multi-band wireless applications. Fitted with a high-pull strength magnetic underneath, the MP-LWG is part of the MP (magnetic puck) antenna range which offers a number of configurations including 2 x LTE and 2 x LTE + GNSS.

The cables for the MP-LWG exit from the side of the antenna so they d not interfere with the mounting mechanism and have integral strain relief for the cables. The cable length and the connector types can be configured per customer requests.

This LTE WiFi GNSS magnetic mount antenna is ideal for transit applications where a permanent mounted antenna by way of a hole in the vehicle roof is undesirable.

Check out the CLWG for the permanent mount version of this antenna.

Please contact us for more information, pricing and lead times.

Hot Product – CMG dual LTE GNSS antenna

Written by EAD Admin on 4th January 2018. Posted in News.

The CMG dual LTE GNSS antenna is a neat solution for MIMO LTE and GNSS applications requiring a robust and low profile puck antenna. Based on EAD’s popular CPx platform, two 690-2700 MHz antenna elements coexist alongside an active GPS/GLONASS antenna.

The CMG is mounted via way of a threaded stud and locking nut underneath and with a robust gasket is IP67 rated when mounted correctly onto a flat surface such as a vehicle roof, street cabinet or kiosk enclosure. The antenna is feed by 3 cables which can be terminated with coaxial connectors per customer requirements including SMA, FME, MMCX, TS9, CRC9.

A version without the GPS/GLONASS element is available – it is called the CMO. It offers 2 x LTE elements and is an ideal complement to LTE routers that have two antenna ports. The CMO can be purchased via the Connex webshop.

4 suggestions for low profile 4G LTE antennas

Written by EAD Admin on 9th October 2017. Posted in News.

Roof and enclosure-mounted low profile 4G LTE antennas are in demand as the IoT bandwagon rolls on so here are 4 suggestions for permanent mount puck style antennas for your application:

4G LTE MIMO puck antenna

This is a two element puck antenna, called the CMO, incorporating two antenna elements operating from 690-960/1710-2690 MHz for 4G LTE applications. Permanently mount by way of stud underneath and locking nut, this antenna has a gasket underneath that provides a waterproof seal once mounted. The antenna mounts onto a ground plane or metal surface and has one cable for each antenna element. Ideal for Wireless CCTV, security and broadband applications, the CMO offers robust RF performance in a compact package.

4G LTE + WiFi puck antenna

Based on the CMO antenna mechanical design, this antenna is called the CLW. It offers 1 x 4G LTE element and 1 x dual band WiFi element for permanent mounting onto a groundplane or metal surface. Suitable for applications where concurrent LTE and WiFi communications are required, the antenna lends itself well to fixed and/or mobile installations.

4G LTE MIMO + GNSS puck antenna

The CMG antenna is also very much based on the CMO antenna. It offers 2 x 4G LTE elements, but also with an added active GPS/GLONASS antenna element. This enables LTE communications concurrently with GPS/GLONASS positioning. Mounted on a metal vehicle roof, this antenna provides a watertight and robust solution for mobile IoT installations.

4G LTE, WiFi + GNSS puck antenna

The CLWG antenna is based on the same blueprint as the CMG antenna, however we have replaced 1 x 4G LTE with a dual band WiFi element. This delivers 1 x 4G LTE, 1 x WiFi and 1 x GNSS in compact and robust package suitable for multiband telematics application where installing 2 or 3 antennas is undesirable.

All these low profile 4G LTE antennas are based on a proven common platform that can be customised if required. Please feel free to use our Antenna Configurator to request a solution that can be designed for your application.

For more information, please feel free to contact us.

New LTE WiFi GNSS puck antenna now available

Written by EAD Admin on 25th September 2017. Posted in News.

Today EAD introduces a new LTE WiFi GNSS puck antenna. We have designed it for vehicle roof or metal surface-mounting. Based on the versatile CPx antenna platform, the CLWG is a discreet and robust antenna. We believe it is ideal for multi-band telematics applications.

As a result of its dimensions, just 106 mm in diameter and 33.5mm in height, this antenna is compact without compromising on performance. As standard, we configure the antenna with three separate cables. One cable each for LTE, WiFI and GNSS. You can customise the cable lengths and connectors as you wish, however we offer 3M cable length and SMA-Male connectors as standard.

We draw your attention to the CLWG’s stable mate, the CMG antenna. The CMG is a 2 x LTE and GNSS puck antenna, part of the same range of robust puck antenna products.

Link to further information

Further information can be found on the CLWG product page.

Contact

We recommend you contact your local EAD distributor for pricing

LTE MIMO outdoor omni with GNSS introduced by EAD

Written by EAD Admin on 22nd September 2017. Posted in News.

EAD today introduces a LTE MIMO outdoor omni with GNSS capability called the LMO7270/G.

We have added an active GNSS element to our LMO7270 antenna as a result enabling positioning functionality alongside LTE connectivity. Housed in a durable radome, the LMO7270/G offers a flexible outdoor antenna solution. The antenna mounts on either a wall/pole bracket or a non-metal enclosure or surface.

Applications for the LMO7270/G include leisure marine vessels and wireless CCTV and security. Both of these deployments have a need for MIMO LTE communications and often require positioning information as well.

For more information and pricing on the LMO7270/G please contact your local EAD reseller or distributor.

LMO7270/G – LTE MIMO GNSS outdoor omni antenna

Written by EAD Admin on 22nd September 2017. Posted in 5G & LTE/4G Antennas.

The LMO7270/G is a LTE MIMO GNSS outdoor omni antenna suitable for LTE access applications requiring a MIMO antenna as well as active GPS/GLONASS functionality. Available either as non-metal enclosure mount or via an optional pole/wall-mount bracket, this antenna is an attractive and effective solution.

Ideal as solution for leisure marine vessels or for wireless security/CCTV systems, the LMO7270/G is complemented by RF240 and RF400 low loss cables enhancing the possibilities for installation.

For a LTE MIMO omni antenna without GNSS, functionality please check out the LMO7270 antenna.

For low loss jumper cables for this antenna, please look carefully at RF240 and RF400 coaxial cables.

CLWG – 4G WiFi GNSS low profile puck antenna

Written by EAD Admin on 4th September 2017. Posted in GPS & GNSS Antennas.

The CLWG is a combined 4G WiFi GNSS low profile puck antenna with one feed for each antenna element i.e one 4G/LTE multiband element, one 2.4/5 GHz WiFi element and one GPS/GLONASS element.

Designed for permanent mounting via a mounting stud onto a metal surface, the CLWG is a compact antenna for multiband wireless deployments in either fixed or mobile applications. The CLWG is highly useful in environments where space is limited or three separate antennas are undesirable.

As standard, the cables are 3M long and each terminated with SMA-Male plug connector.

For simply 2 x LTE and GNSS, you could consider the CMG antenna.

GPS560 – GPS GLONASS mobile magnetic antenna

Written by EAD Admin on 30th August 2017. Posted in GPS & GNSS Antennas.

The GPS560 is a GPS GLONASS mobile magnetic antenna offering a cost-effective magnetic-mount solution for mobile GNSS applications. It is designed for fleet management, telematics and asset tracking deployments where the antenna should be roof mounted or mounted onto a metal surface or bracket.

Housed in an aesthetically pleasing enclosure, the GPS560 is supplied with 3M RG-174 and SMA-Male connector as standard, but other cable and connector configurations are possible.

The GPS560 antenna has dimensions of 45x45x14.6mm and has a LNA gain of 27 dB

For a GPS only version, we have the GPS460 available in magnetic mount and the GPS450 in adhesive mount options.

CMG – Dual LTE GNSS puck antenna

Written by EAD Admin on 21st August 2017. Posted in GPS & GNSS Antennas.

The CMG antenna is an IP67 dual LTE GNSS puck antenna (2 x LTE + 1 x GPS/GLONASS) designed for mobile as well as fixed LTE applications.

Housed in a very robust package, the CMG is mounted by way of a threaded mounting stud with the 3 cables exiting through the mounting stud.

Once mounted via a 20mm hole, the CMG is sealed and waterproof and suitable for mounting onto vehicles, industrial machinery and enclosures. The recommended cable length is up to 3M. With two LTE elements, the CMG supports MIMO routers for LTE and offers GPS/GLONASS signal reception for positioning. It is recommended that the CMG is mounted onto a metal surface.

Our CLW and our CLWG platforms offer LTE with WiFI or LTE with WiFi and GNSS respectively.

The formal part number for the CMG is FCMG35343.

CLG – low profile LTE GNSS puck antenna

Written by EAD Admin on 19th July 2017. Posted in GPS & GNSS Antennas.

The CLG is a LTE GNSS puck antenna with one 4G/LTE multiband element and one GPS/GLONASS element. Mounted via a stud underneath, the CLG is low profile and designed for continuous outdoor use on vehicles, enclosures, cabinets and other devices for applications such as telematics, wireless CCTV, security and telemetry/remote monitoring.

Fed by one cable for the 4G/LTE multiband element and one cable for the GPS/GLONASS, the CLG puck antenna is a compact and robust antenna based on the proven CPO platform. This antenna is IP67 rated when mounted correctly onto a flat surface.

For a MIMO LTE and GNSS low profile puck antenna, please check out the CMG antenna.