Tag: antenna

CPW – 2.4/5 GHz Low Profile WLAN puck antenna

Written by EAD Admin on 21st August 2017. Posted in 2.4 & 5.8 GHz Antennas.

The CPW is a WLAN puck antenna and is a tough and durable dual band 2.4 and 4.9-6.0 GHz puck antenna with approx 3 dBi gain on the lower band and 5 dBi on the upper band.

The antenna is a low profile screw-mount antenna requiring a 20mm drill hole. The cable exit is on the underside of the antenna and once mounted is totally enclosed, secure and waterproof. The antenna is secured in place by a nut that is tightened from underneath. The CPW WLAN puck antenna is ideal for Wireless LAN and WiFi applications where a discrete antenna is required, but performance cannot be compromised.

The part number is FCPW35168-XX-XX where XX-XX refers to cable and length and connector type.

A cellular version (CPT) and GSM/3G (CPO) version of this antenna are also available.

LTF7270 – 4G LTE captive mount terminal antenna

Written by EAD Admin on 21st August 2017. Posted in 5G & LTE/4G Antennas.

The LTF7270 is a multiband multi-position, articulating, 4G LTE captive mount terminal antenna for modems, routers and devices that are running a radio module with U.FL connectors.

The LTF7270 offers a terminal mount antenna solution without the need to use a bulkhead (or panelmount) SMA connector on the enclosure. It has articulating base that locks in 3 positions, vertical, horizontal and at 45 degrees. The antennas mount by way of a threaded stud and are held in place by a locking nut. Through the middle of the stud a coaxial cable feeds the antennas via an IPEX (U.FL compatible) connector.

The LTF7270 is ideal for and for applications where users should be discouraged from removing the antenna from the terminal or device.

WTR7270 – Portable 4G LTE Terminal Antenna

Written by EAD Admin on 21st August 2017. Posted in 5G & LTE/4G Antennas.

The WTR7270 is 4G LTE terminal antenna, a groundplane independent dipole, covering worldwide LTE, 4G, 3G and GSM bands including 700/800/900/1800/2100 and 2600 MHz for LTE, Cellular, GSM and UMTS (3G) operation. It has a robust and discreet injection-moulded cover and comes with SMA-Male swivel joint connector that can lock in three positions. The WTR7270 offers a gain of 1 dBi.

The WTR7270 4G LTE terminal antenna is an ideal solution for LTE and penta-band cellular applications including wireless routers, modems and access points and for telemetry and telematics where comprehensive LTE, cellular, GSM and 3G capability is required. Two WTR7270 antennas can be used together on terminals and routers requiring MIMO or diversity functionality.

The formal part number is FWTR35292-SM-KR. For customers in Europe requiring small quantities, you can purchase the WTR7270 via the Connex webshop.

For a LTE stubby antenna, check out the LTE-Stubby.

L-Mag – mobile mount 5G 4G LTE magnetic antenna

Written by EAD Admin on 21st August 2017. Posted in 5G & LTE/4G Antennas.

The L-Mag is a 5G 4G LTE magnetic antenna operating across the 700-2700/3400-3800 MHz frequency bands and designed for fixed and mobile wireless applications. A compact radiating element housed in a moulded sheath is mounted onto a magnetic base to facilitate 4G/LTE communications including the 700 MHz LTE band, European LTE bands at 800 MHz, 1800 MHz and 2600 MHz and 5G Bands at 3400-3800 MHz.

Measuring just 110mm in overall length with a base diameter of 30mm excluding the cable and connector, the L-Mag is compact, however is large enough to comfortably cover the frequency bands for 5G, LTE, 4G, 3G, GSM and cellular connectivity. As standard, the L-Mag is supplied with a 3M RG174 cable and a SMA-Male connector.

UK customers can order the L-Mag via the Connex webshop.

The formal part code for this part is FLMG35336-SM-3K.

For a 4G terminal antenna, please take a look at the WTR7270 antenna.

FGO – 4G LTE high gain omni antenna

Written by EAD Admin on 21st August 2017. Posted in 5G & LTE/4G Antennas.

The FGO is a 4G LTE high gain omni antenna covering 690-960/1710-2170/2500-2700 i.e. LTE, 4G, 3G, GSM and cellular frequency bands.

With a peak gain of 5dBi across the lower, middle and upper bands respectively, the FGO is unrivalled where a discrete, but high gain antenna is required, especially in 4G access, CCTV, security, metering and remote telemetry applications. The antenna is groundplane independent and can be mounted on a pole or on a wall.

The FGO is supplied with a robust bracket and is terminated in a N-Female connector.

Custom jumper cables can be assembled to the required configuration.

LMO7270 – 4G LTE outdoor MIMO omni antenna

Written by EAD Admin on 21st August 2017. Posted in 5G & LTE/4G Antennas.

The LMO7270 is a 4G LTE outdoor MIMO omni antenna with dual polarised radiating elements. Housed in a durable radome, the LMO7270 antenna is suitable for outdoor applications including leisure marine environments to improve reception of 4G (LTE), 3G and GSM signals, especially for wireless broadband, security and CCTV deployments.

The frequencies supported are 700, 800, 900, 1800, 1900, 2100 and 2600 MHz covering all major 4G, LTE, GSM and 3G frequency bands.

The LMO7270 measures approximately 187mm in height and 106mm at the base. It is available with or without the wall/pole mount bracket and fed by two short pigtail cables, allowing for longer jumper cables such as BWL195, RG240 and RF400 to be connected for specific cable runs.

The LMO7270 antenna is supplied with a gasket and a moulded nut as standard so the antenna can be installed as a permanent, through-hole mount solution to be mounted onto a non-metal surface or enclosure. Alternatively, the antenna can be ordered to include brackets for wall or pole mount. A marine mount adapter for mating to standard 1 inch marine mounts is available.

European customers can order small quantities of the LMO7270 4G LTE outdoor MIMO omni antenna via the Connex webshop.

For a MIMO LTE puck antenna, please take a look at our CMO antenna.

CMO – 4G LTE MIMO puck antenna

Written by EAD Admin on 21st August 2017. Posted in 5G & LTE/4G Antennas.

The CMO is 4G LTE MIMO puck antenna operating at 4G/LTE multiband frequencies from 690-2700 MHz. A permanent, through-hole mount antenna, the CMO has two 4G/LTE/Multiband elements enabling MIMO operation in discreet, robust housing.

With peak gain ranging across the bands from 1 dBi to 3.5 dBi, the CMO offers an effective solution for mobile 4G and LTE MIMO applications offering support for 3G and GPRS services if required.

The CMO mounts via a threaded stud and is held in place by a robust locking nut. In conjunction with the gasket underneath, a waterproof seal against a flat mounting surface can be formed ensuring that the antenna is suited to continuous outdoor deployment. The CMO antenna operates most effectively if it is mounted onto a metal surface, enclosure or bracket. The mounting hole size is 20mm.

Supplied as standard with 2 x RG174 cables, the antenna can be customised with a number of connectors including SMA, TS9, FME, TNC, CRC9.

The CMG antenna is the CMO, but with an added GPS/GLONASS element.

European customers can purchase the CMO antenna via the Connex webshop.

The formal part number for the CMO is FCMO35303. For example, the CMO with 2M cables would be FCMO35303-SMSM-2K.

MIMO-Blade – 4G LTE MIMO blade antenna

Written by EAD Admin on 20th August 2017. Posted in 5G & LTE/4G Antennas.

The MIMO-Blade is a 2 x LTE/4G multiband waterproof MIMO blade antenna designed to complement 4G and LTE routers, modems and gateways in fixed and mobile applications. Housed in a robust, durable cover and IP67 rated cover, the MIMO-Blade is a discreet solution for mounting on non-metal surfaces such as vehicle windows, dashboards, inside kiosks or terminals or in locations outside a vehicle or enclosure.

The MIMO-Blade is supplied with two RG174 cables and these can be specified to customer-required length and choices of connector, SMA-Male, FME-Female and TS9 connectors are popular. The MIMO-Blade antenna is fully IP67 compliant.

Applications that this MIMO antenna is used for include vehicle telematics, vending, kiosks and wireless video. The MIMO-Blade is supplied with removable suction cups for mounting and can also be mounted with adhesive tape, velcro, cable ties or plastic screws.

The MIMO-Blade can be purchased by European customers via the Connex webshop.

For a MIMO LTE omni antenna, take a look at the LMO7270 antenna.

For LTE flexible PCB antenna, the L-Flex is an attractive solution.

H169-SMA – 1/4 wave 169 MHz Helical Antenna

Written by EAD Admin on 19th July 2017. Posted in 169 / 433 / 868 / 915 Antennas.

The H169-SMA is a 1/4 wave 169 MHz helical antenna tuned with a centre frequency at 169 MHz. It is housed in a flexible moulded sheath and is terminated in a SMA-Male connector. Other connectors can be used, subject to a minimum order quantity.

Designed with the EU unified licensed band at 169 MHz, the H169-SMA is suitable for metering and similar applications. The antenna has an overall length of approximately 140mm and a diameter of 13.5mm.

The antenna should be mounted onto a suitable groundplane for optimum operation.

Other VHF frequency bands are possible and a variety of other connectors are possible too including RP-SMA, TNC, RP-TNC, BNC.

Check out the WCO-169-WMB for a compact 169 MHz wall-mount antenna.

The H169-SMA 169 MHz Helical antenna can be purchased in small quantities by European customers from the Connex webshop.

H155-BNC Helical

Written by EAD Admin on 19th July 2017. Posted in VHF & UHF Antennas.

The H155-BNC is a 155 MHz helical antenna based on a 1/4 wave helical injection moulded antenna design with a BNC-Male connector working at 155 MHz.

The housing is flexible and durable and designed for VHF terminal applications – both fixed and mobile – including security and PMR/LMR communications.

The antenna is available in different frequency and connector configurations. Other frequencies include 169 and 173 MHz. Other connectors include TNC and SMA. Minimum order quantities may apply to some connectors and frequency depending on demand.

CLG – low profile LTE GNSS puck antenna

Written by EAD Admin on 19th July 2017. Posted in GPS & GNSS Antennas.

The CLG is a LTE GNSS puck antenna with one 4G/LTE multiband element and one GPS/GLONASS element. Mounted via a stud underneath, the CLG is low profile and designed for continuous outdoor use on vehicles, enclosures, cabinets and other devices for applications such as telematics, wireless CCTV, security and telemetry/remote monitoring.

Fed by one cable for the 4G/LTE multiband element and one cable for the GPS/GLONASS, the CLG puck antenna is a compact and robust antenna based on the proven CPO platform. This antenna is IP67 rated when mounted correctly onto a flat surface.

For a MIMO LTE and GNSS low profile puck antenna, please check out the CMG antenna.

BKR868 – 1/2 Wave 868 MHz dipole antenna

Written by EAD Admin on 19th July 2017. Posted in 169 / 433 / 868 / 915 Antennas.

The BKR868 is an 868 MHz dipole antenna, 1/2 wave and groundplane independent, designed for ISM-Band terminals and devices that do not have a groundplane or metal surface on which to mount a 1/4 wave antenna.

Housed in a durable sheath, the BKR868 has a multi-position SMA-Male connector that allows the antenna to operate in a horizontal or vertical position. This makes it suitable for portable devices where the orientation of the product is subject to change or is not known.

With a VSWR of less than 2:1 and a gain of 2 dBi, the BKR868 is an effective antenna solution for a range of 868 MHz ISM band applications.

The formal part code for this antenna is FBKR35300-SM-KR.

A 915 MHz version of this antenna is available called the BKR915.

BKR2100

Written by EAD Admin on 19th July 2017. Posted in GSM & 3G Antennas.

The BKR2100 is a 3G dipole antenna, 1/2 wave groundplane independent, with a SMA-Male knuckle connector operating at 2.1 GHz. This is an ideal product for 3G and UMTS applications where a groundplane or a proximity groundplane is not available.

The sheath is a rubber semi-flexible housing and the knuckle joint is robust to handle repeated movements.

For more information, please contact EAD.

Using 915 MHz antennas for LoRa communications? Some food for thought!

Written by EAD Admin on 5th April 2017. Posted in News.

If you are designing wireless applications using the licence-free 915 MHz ISM band, for example using 915 MHz antennas for LoRa, LPWAN and IoT communications, choosing the correct antenna for your application is important for optimal wireless performance. To help our customers understand the options for 915 MHz antennas available, we thought it might be beneficial to list out some 915 MHz (there are also 868 MHz alternatives for regions using 868 MHz) omni-directional antenna options covering both small and larger antennas suitable for a variety of applications.

1/4 Wave Whip Antenna

An enclosure-mounted 1/4 wave moulded whip antenna (requires a groundplane typically 10x10cm to mount on) with RP-SMA or SMA-Male connectors typically (TNC, BNC connectors are also possible). Suitable for fixed and portable terminals.

1/4 Wave Whip Antenna with Flying Lead

Similar to the antenna above, this 915 MHz 1/4 Wave whip antenna has a mounting stud at the bottom for permanent mounting and a RG174 cable exiting at the bottome to connect the antenna to module/radio. This antenna can be used for both fixed and portable applications.

915 Mhz Whip with Flying Lead

Stub Antenna

A 1/4 wave helical stubby-style antenna with an approximate sheath length of 55mm. This is suitable for fixed and portable applications. The connector at the bottom can be SMA or RP-SMA and with either a straight or right angle orientation. This antenna should be mounted onto a groundplane (typically 10x10cm would be ideal).

915 MHz Stubby Antenna

Swivel Dipole Antenna

A 1/2 wave dipole antenna for 915 MHz with either SMA or RP-SMA. The antenna can be fixed in vertical or horizontal positions or at 45 degrees if required. This antenna is groundplane independent so can be mounted onto non-metal (i.e. ABC, PC etc.) surfaces such as plastic enclosures.

915 MHz Swivel Dipole

Waterproof Compact Omni Antenna

For outdoor applications, a compact waterproof 915 MHz omni antenna might be the solution. Where a durable, weatherpoof groundplane independent antenna is required, this antenna is discreet yet robust and flexible to accommodate a range of applications.

915 MHz Waterproof Compact Omni Antennas

Available with a variety of connectors including SMA, RP-SMA, N-Type, TNC, RP-TNC with straight and some right angle versions, these antennas a Flame retardant, UV-resistant sheath and there are versions at 915 MHz for mounting onto metal or non-metal surfaces. A through hole (stud mount) version is also available based on a N-Female Panel mount connector (with O-Ring for a watertight seal plus washer and nut for locking in place onto the enclosure.

Outdoor Wall-Mount Omni Antenna

For small, wall-mounted antennas, then the wall-mounted version of the above compact omni might be well worth taking a look at. This antenna is supplied with the flame retardant and UV-resistant sheath terminated in N-Female connector and mounted on a stainless steel bracket. Jumper cables can be specified to order depending on the grade of cable required for the length of cable run required – the jumper cable requires a N-Male Plug to connect to the antenna.

915 MHz Compact Wall-Mount Omni

High Gain Omni Antenna

A 5.8 dBi outdoor high gain omni antenna can be deployed when the site is located in an area of fringe signal. Typically supplied with a jumper cable such antenna is often housed in a fibreglass or weatherproof sheath and will come with mounting hardware.

915 MHz High Gain Omni Antenna

These are standard off-the-shelf 915 MHz omni-directional antenna products suitable when using 915 MHz antennas for LoRa communications . This listing is not exhaustive, but is designed to give you some food for thought. For further information and for other 915 MHz antenna requirements, please contact us at sales@ead-ltd.com.

Tag: antenna

Privacy Settings

Functional