Skip to main content

Tag: WLAN

WIMO2458 4-Port WiFi Dual Band Omni-directional Antenna

The WIMO2458 4-Port WiFi Dual Band Omni-directional Antenna is designed for continuous outdoor deployment. Housing four 2.4/5 GHz antenna elements, the WIMO2458 antenna is a compact solution for wall, pole or non-metal enclosure mounting.

Ideal for outdoor pole- and wall-mounted applications in environments where traditional ceiling mount antennas are undesirable, the WIMO2458 is a compact alternative for dual band WLAN installations, buildings and campuses hospitality, transportation and retail.

With almost 4 dBi gain in the 2.4 GHz band and more than 5 dBi gain in the 5 GHz band, the WIMO2458 4-Port WiFi antenna offers consistent RF performance across the bands. With a radome height of 187mm and a diameter at the base of 106mm, the antenna is relatively discreet for most installations and can be fed by low loss coaxial cables as required.

The WIMO2458 is part of our MIMO Omni range – check out the 5/GLTE version the LMO6138,

VLP4 antenna integrates 450 LTE GPS WLAN capabilities

A new version of EAD’s VLP4 antenna integrates 450 LTE GPS WLAN frequencies into one low profile roof-mount antenna. Ideal for LTE 450 and LTE multiband applications, this VLP4 version also offers a 2.4 GHz WLAN element and an active  GPS/GLONASS element for positioning.

Fed by three cables, one for LTE450/700-2700 MHz, one for WLAN and one for GPS/GLONASS, the VLP4 is an effective solution for transit applications, trucking and machinery where 4G connectivity alongside positioning and WiFi capabilities is required.

For more information and pricing on this antenna, please contact us here at EAD and we’ll be happy to help you.

For more generic VLP4 information, please visit the product page.

CPD – Dual element WiFi low profile puck antenna

The CPD is a dual element WiFi low profile puck antenna with two 2.4 / 5 GHz dual band antenna elements. Designed for WiFi applications requiring two simultaneous connectors, the CPD is based on our modular puck antenna platform. Rated as IP67 once mounted onto an enclosure or vehicle roof, the CPD is discreet and robust and suited to long-term outdoor deployment.

The dual cables can be configured by the customer for length and there is a choice of connectors, typically RP-SMA, RP-TNC or standard SMA.

For a single band 2.4/5 GHz puck antenna, please check out the CPW. For a 1 x WiFi and 1 x LTE, please check out the CLW antenna.

WCO-2400-WMB – compact outdoor WLAN wall mount antenna

The WCO-2400-WMB is a compact outdoor WLAN wall mount antenna designed for continuous outdoor deployment. Housed in a flame-retardant, UV-resistant sheath, the WCO antenna is mounted onto a stainless steel L-bracket for permanent outdoor mounting.

The WCO-2400-WMB antenna offers 2 dBi gain across the 2.4 GHz and 5 GHz bands, the WCO-2400-WMB is fed by a N-Female connector underneath and mates to custom jumper cables as the installation requires. The cables could be short extension cables or low loss jumper cables for longer cable runs.

Other frequencies are available in the same form factor – 433 MHz, 868 MHz and pentaband GSM/3G.

As an alternative, you could consider the CPW 2.4 / 5 GHz puck antenna on a wall-mount L-bracket.

BT-Stubby – quarter wave WLAN stubby antenna

The BT-Stubby is a cost-effective quarter wave WLAN stubby antenna operating in the 2.4 GHz WiFi frequency band and is used for wireless device applications including portable and fixed units. Requiring a suitable grounplane to operate efficiently, the BT-Stubby needs to be mounted onto a metal surface or enclosure.

As standard the BT-Stubby is offered with a SMA or RP-SMA connector. You can check our blog for the coaxial connector selection guide to help you determine the correct connector.

The BT-Stubby is available in straight or right-angle SMA or RP-SMA versions. It usually is panel mounted and mates to a pigtail or adapter cable terminated in a SMA-Female Bulkhead connector or a RP-SMA Bulkhead Jack connector.

CLWG – 4G WiFi GNSS low profile puck antenna

The CLWG is a combined 4G WiFi GNSS low profile puck antenna with one feed for each antenna element i.e one 4G/LTE multiband element, one 2.4/5 GHz WiFi element and one GPS/GLONASS element.

Designed for permanent mounting via a mounting stud onto a metal surface, the CLWG is a compact antenna for multiband wireless deployments in either fixed or mobile applications. The CLWG is highly useful in environments where space is limited or three separate antennas are undesirable.

As standard, the cables are 3M long and each terminated with SMA-Male plug connector.

For simply 2 x LTE and GNSS, you could consider the CMG antenna.

CLW – 4G LTE WiFi low profile puck antenna

The CLW antenna is a 4G LTE WiFi low profile puck antenna with one 4G/LTE multiband element and one WiFI element. Mounted via a stud underneath for permanent mounting, the CLW is designed for continuous outdoor use on vehicles, enclosures, cabinets and other devices for applications such as telematics, wireless CCTV, security and telemetry/remote monitoring.

Fed by one cable for the 4G/LTE multiband element and one cable for the WiFi, the CLW is a compact and robust antenna based on the proven CPO antenna platform.

The CMO is a dual 4G/LTE antenna in the same form factor.

A version with GPS/GLONASS called the CLWG is also available.

BUF2400 – WiFi captive mount terminal antenna

The BUF2400 is a WiFi captive mount terminal antenna based on a 2.4 GHz ½ wave dipole design for fixed and portable WiFi and WLAN wireless devices.

Supporting the 2.4 GHz frequency, the BUF2400 is mounted using a captive, multi-position snap-in part and connected to the radio using a U.FL compatible connector.

The BUF2400 is an ideal solution for applications where an external bulkhead (panel mount) antenna connector is not required or undesirable and/or detaching the antenna from the terminal during use is to be avoided.

The BUF2400 provides a neat WLAN and Bluetooth antenna solution. For 4G captive mount antennas, you could consider the LTF7270 antenna. 

BTR2458 – dual band WLAN terminal antenna

The BTR2458 is a dual band WLAN terminal antenna operating at 2.4 – 2.5 GHz and 4.9-6.0 GHz. It is a compact, groundplane independent terminal antenna with a SMA-Male connector and is suitable for access points, gateways and terminals that require a dual band antenna for WLAN applications. For single band terminal antennas for WiFi, the BKR2400 might be a suitable option.

The BTR2458 has a gain of 2 dBi and a VSWR of less than 2:1 across the bands. When fully extended, the overall length of the antenna is less than 100mm. The compact design means that the antenna is a discreet solution for mobile applications where larger dual-band antennas could cause an obstruction or be cumbersome.

The two common part numbers are FBTR35160-SM-KR with SMA-Male connector and FBTR35160-RS-KR with RP-SMA connector.

BKR2400 – 2.4 GHz WLAN Terminal antenna

The BKR2400 is a WLAN terminal antenna and is a 1/2 wave dipole antenna with a SMA-Male knuckle operating at 2.4 GHz. It has a rubberised moulded sheath for durability. The SMA connector locks in the vertical and horizontal positions for flexibility of installation. This is an ideal product for WLAN, Zigbee and Bluetooth applications where a groundplane or a proximity groundplane is not available. It is not recommended that the BKR2400 is mounted onto a metal enclosure.

The BKR2400 is often used on WLAN terminals, routers and access points and offers 2 dBi of gain. It is also available with a RP-SMA connector

The formal part code for this antenna is FBKR35068-SM-KR with SMA-Male or FBKR35068-RS-KR with RP-SMA.

CPW – 2.4/5 GHz Low Profile WLAN puck antenna

The CPW is a WLAN puck antenna and is a tough and durable dual band 2.4 and 4.9-6.0 GHz puck antenna with approx 3 dBi gain on the lower band and 5 dBi on the upper band.

The antenna is a low profile screw-mount antenna requiring a 20mm drill hole. The cable exit is on the underside of the antenna and once mounted is totally enclosed, secure and waterproof. The antenna is secured in place by a nut that is tightened from underneath. The CPW WLAN puck antenna is ideal for Wireless LAN and WiFi applications where a discrete antenna is required, but performance cannot be compromised.

The part number is FCPW35168-XX-XX where XX-XX refers to cable and length and connector type.

A cellular version (CPT) and GSM/3G (CPO) version of this antenna are also available.