Tag: GPS

ELX1215-SMA L1/L2 GNSS Helix Antenna

Written by EAD Admin on 14th October 2026. Posted in GNSS Antennas, GPS & GNSS Antennas.

The ELX1215-SMA L1/L2 GNSS helix antenna is a compact solution for precision positioning, navigation and timing applications.

It is a dielectrically loaded helical antenna for L1 and L2 bands. It has an intrinsic band-pass filter response, tightly tuned to L1 and L2 frequency bands which provides protection from out of band interference. This antenna is robust and durable with high multi-frequency gain for its size and footprint. The ELX1215-SMA supports multi-constellations including GPS L1/L2, BeiDou B1, Galileo E1, GLONASS G1 and SBAS.

Key Features:

High gain across both bands
High accurate, focused phased centre
RHCP with excellent co-to-cross polarisation ratio
Immunity to detuning in near field
SMA connector mount – O-ring in base for ingress protection

Applications:

Drones/UAVs
Asset Tracking
Portable GNSS Terminals
Precision Navigation
Industrial / Agricultural Applications

The ELX1215-SMA GNSS helix antenna can also be supplied as an “embedded” version without the radome.

GrAnt-3L precision antenna for high accuracy

Written by EAD Admin on 18th September 2026. Posted in GNSS Antennas.

The GrAnt-3L precision antenna from Javad has full GNSS spectrum compatibility to track GPS, GLONASS, Galileo, BeiDou, QZSS, WAAS, EGNOS, MSAS, GAGAN and L-Band signals.

The GrAnt-3L features a stable phase center with enhanced signal reception and is ideal for high precision positioning using L-Band corrections. With a durable IP68 housing, it is an ideal solution for CORS/Infrastructure, machine control and agriculture.

Key Features:

• All GNSS Constellations with L-Band Support
• Weatherproof Housing (IP68)
• Extended Operating Temperature
• Stable Phase Center
• Tracking To Horizon
• Aluminum Base

The GrAnt-3L precision antenna can mount via a 5/8 x 11 inch pole or via 4 x M5 holes. The connector is TNC. The dimensions are 140 x 140 x 62 mm and the antenna weight is 515g.

Additionally, there is a model of this antenna with patented filtering of out-of-band interference and with higher input power for in-band signal. This model is the GrAnt-G2T-JSM.

HX-CT3602A Timing Antenna GPS GLONASS L1

Written by EAD Admin on 20th June 2024. Posted in GNSS Antennas.

The HX-CT3602A timing antenna from Harxon is especially designed for timing, mobile, precision and military applications, covering the GPS, GLONASS and GALILEO signal reception. It can provide truly circular response over the antenna’s entire bandwidth thereby producing superior multipath signal rejection.

This antenna features a highly circular wideband patch element with a high-performance Low Noise Amplifier. This configuration provides excellent axial ratio that is constant across the full frequency band. Its filtering design allows for wideband coverage while achieving superior out of band rejection and high gain 28dB performance. The small, conical design minimizes perching and provides runoff.

The HX-CT3602A timing antenna is housed in a permanent mount industrial-grade weatherproof enclosure and terminated in a TNC-Female connector.

For more information download the datasheet or contact us for pricing and availability.

Check out the HX-CH7609A, a compact helix antenna for UAV applications.

GNS3602 GPS GLONASS passive internal antenna

Written by EAD Admin on 29th September 2020. Posted in GPS & GNSS Antennas.

The GNS3602 GPS GLONASS passive internal antenna is fed by a microcoax cable and IPEX-terminated (U.FL compatible) cable. The GNS3602 is designed to be integrated into GPS / GLONASS enabled devices and terminals where the GNSS module can only accommodate passive GPS/GLONASS antennas (GNSSS antennas without a LNA Low Noise Amplifier).

The GNS3602 is nicely compact measuring just 20 x 20 x 6mm and offers 1.5 dB gain at centre frequency. Ideal for portable and mobile devices, this antenna can be easily designed into tracking and location-based applications.

The GPS3602 is the GPS only version of this antenna.

Other cable lengths and connector configurations are possible, please contact EAD for details.

Also check out our GPS-Stubby antennas for active GPS stubby antenna solution.

HX-CH6601A GNSS active helix antenna now in stock

Written by EAD Admin on 9th June 2020. Posted in News.

The HX-CH6601A GNSS active helix antenna from Harxon is now in stock in the UK for purchase. Receiving signals from GPS L1, L2, GLONASS L1, L2 and Galileo constellations, it is lightweight, high performing antenna solution.

With an integrated LNA offering effective gain of around 33 dB, the antenna weighs less than 25g and measures just 59mm in length and 27.5mm in diameter. The antenna is terminated in a SMA-Male connector.

The HX-CH6601A is ideal for UAV, GIS surveying and a number of precision positioning applications.

The HX-6601A GNSS active helix antenna can be purchased by European customers in small quantities via the Connex Webshop.

For more information, please contact us.

CH6601A D-Helix GNSS L1 L2 Active Antenna

Written by EAD Admin on 22nd May 2020. Posted in GNSS Antennas.

The HX-CH6601A D-Helix GNSS active antenna is able to track visible satellites under challenging conditions, providing
positioning solutions with high precision and reliable data. Its stable phase center guarantees the accuracy of positioning within millimetre level, that can be widely used in plant protection, tree lines, also for UAV power patrol, GIS surveying where high precision operations are
needed.

Supporting GPS L1 and L2, GLONASS L1 and L2, Galileo E1 as well as Beiduo, QZSS and SBAS, this antenna offers a practical and very functional solution for mobile applications requiring precision positioning.

Measuring just 59mm in length and 27.5mm in diameter, the HX-CH6601A antenna weighs just 25g and offers IP67 protection against the elements.

The HX-CH6601A D-Helix GNSS active antenna LNA features excellent out-of-band rejection performance, which can suppress the electromagnetic interference, providing the stability and reliability of GNSS signals. Also it effectively avoids disconnection dangerous when UAVs are operated under tower and electric power patrol.

For more Harxon products, please visit their website and contact us for pricing and availability. Small quantities available from the Connex Webshop.

L1 L2 L5 Antennas from EAD offer enhanced precision

Written by EAD Admin on 23rd October 2019. Posted in News.

Two L1 L2 L5 antennas introduced recently by EAD enable enhanced precision and accuracy in global GNSS tracking and timing applications.

The MP-RTK is a global GNSS magnetic mount puck antenna which is robust and low profile with an active antenna element. Ideal for mobile non-permanent tracking and positioning installations where permanent mount antennas are undesirable, the MP-RTK antenna is compact, durable and waterproof. It is fed by a 3M cable as standard which exits from the side of the unit and whilst terminated with a SMA-Male connector as standard, other connector terminations are possible. The MP-RTK antenna has an integrated LNA with approximately 37 dB effective gain for GPS L1, 36 dB effective gain for GPS L2 and 32 dB effective gain for GPS L5 thereby offering high gain performance.

The HIGAIN-RTK antenna is a high gain multi-constellation antenna for outdoor pole-mount deployment. This antennas mounts to poles with a 1-14 UNF thread. With effective gain of 41 dBi for GPS L1, GLONASS G1, GALILEO E2-L1-E1 and BEIDOU B1 and an effective gain of 39 dB for GPS L2, L5, GLONASS G2, GALILEO E5A, E5B, E6 and BEIDUO B2 and B3, the HIGAIN-RTK offers flexibility allowing the antenna to be installed some distance from the receiver using low loss cables.

For more information and quotations on our L1 L2 L5 antennas, please contact us.

8111D-HR GNSS Magnetic High Rejection Tracking Antenna

Written by EAD Admin on 23rd August 2019. Posted in GNSS Antennas.

The 8111D-HR GNSS magnetic high rejection antenna from market-leading antenna vendor PCTEL is ideal for any global GNSS tracking application that requires an externally mounted antenna. PCTEL’s proprietary filtering design allows wideband coverage while achieving superior out-of-band rejection.

Mounted via integral magnets in the base, the 8111D-HR GNSS magnetic antenna is fully waterproof and designed for continuous outdoor deployment.

This antenna offers 26 dB LNA gain with exceptional filtering capabilities. Various cable lengths and connector configurations are possible. Please contact us for details, configurations and pricing.

For a GNSS timing antenna, check out the GNSS1-TMG or the 8178D antennas both from leading manufacturer PCTEL.

8178D GPS GLONASS network timing reference antenna

Written by EAD Admin on 23rd August 2019. Posted in GNSS Antennas.

The PCTEL 8178D GPS GLONASS antenna network timing antenna is a high gain conical antenna design with superior out of band rejection technology

The 8178D antenna from PCTEL is a time sync antenna offering dual band frequency support for GPS L1 and GLONASS L1 frequencies. It has compact, conical form factor that can aid run-off and also minimise perching. The 8178D is suitable for any global GPS GLONASS time synchronisation application that requires an externally mounted antenna

The 8178D antenna has a built in LNA (low noise amplifier) and offers an effective gain of 40 dB. The antenna is terminated with TNC-Female connector and has a couple of options for pipe mounting. Please contact SAS for the mounting options for this antenna.

As alternative GPS GLONASS timing reference antenna, you could consider the GNSS1-TMG antenna.

GNSS1-TMG global GNSS network timing antenna

Written by EAD Admin on 23rd August 2019. Posted in GNSS Antennas.

The PCTEL GNSS1-TMG is a global GNSS timing reference antenna covering GPS L1, GALILEO E1, GLONASS L1 and BEIDOU B1 (COMPASS) frequency bands.

There are two models: a 26 dB gain or a 40dB gain version.

This antenna is based on a quadrifiliar helix design and in conjunction with a low noise, high gain amplifier and advanced out-of band rejection, the GNSS1-TMG antennas offer superior performance for timing and synchronization applications.

The 40 dB version is best suited to applications requiring long coaxial cable runs. There are also a number of mounting kit options available depending on the type of installation.

New high gain multi constellation GNSS antenna

Written by EAD Admin on 29th October 2018. Posted in News.

The new HIGAIN-RTK antenna from EAD is a high gain multi constellation GNSS antenna is designed for outdoor pipe-mounted positioning applications receiving signals from GPS L1, L2, L5, GLONASS G1, G2, Galileo and Beidou systems. With a typical effective gain of around 39-40 dB with LNA, the HIGAIN-RTK offers excellent performance in a discreet IP67 waterproof enclosure.

With a 1-14 UNF thread in the base of the antenna, it can be mounted onto threaded pipes and mounting poles or alternatively can be clamped to a mast. Used in conjunction with RF240 or RF400 cables, this antenna can be located some distance away from the receiver for maximum installation flexibility.

For more information on the HIGAIN-RTK, please visit the product page here or contact EAD or your local distributor for availability and pricing.

First units of MP-RTK L1/L2/L5 antenna available

Written by EAD Admin on 1st October 2018. Posted in News.

The first units of EAD’S new MP-RTK L1/L2/L5 antenna available have now been dispatched to our initial customers.

The MP-RTK is a magnetic mount puck antenna supporting the reception of multi-constellation signals including GPS L1, L2, L5, GLONASS G1, GLONASS G2 and BeiDou. Well-suited for high precision applications such as precision agriculture, the MP-RTK antennas offers a high gain, but compact antenna solution for mounting onto a metal surface such as a vehicle roof.

Fed by a RG174 cable and SMA-Male connector as standard, the MP-RTK antenna has high pull-strength magnets built into the base of the antenna.

For more information, availability and pricing, please contact us.

MP-RTK – Multiband High Precision GNSS Antenna

Written by EAD Admin on 13th September 2018. Posted in GPS & GNSS Antennas.

The MP-RTK multiband high precision GNSS antenna is a rugged low profile magnetic mount antenna operating in a multi constellation environment including GPS L1, GPS L2, GPS L5, Galileo,GLONASS and BeiDou.

Fed by a single RG174 cable for all frequencies, the MP-RTK antenna has an integrated LNA with approximately 37 dB effective gain for GPS L1, 36 dB effective gain for GPS L2 and 32 dB effective gain for GPS L5 thereby offering high gain performance.

With a strong magnetic in the base of the antenna, it is ideal for vehicle or non-permanent mounting applications offering a rapid and simple deployment for high precision positioning applications. It is also possible to supply the MP-RTK antenna with a permanent mounting option based on our CPx base enclosure.

For European customers, small quantities can be purchased via the Connex webshop. For larger quantities and customers outside Europe, please contact your local EAD distributor or us here in the UK for more information.

Multi Constellation Magnetic Antenna for RTK applications

Written by EAD Admin on 5th September 2018. Posted in News.

EAD is introducing a multi constellation magnetic antenna for RTK GNSS applications. The MP-RTK antenna is based on the popular MP (Magnetic Puck) platform and supports GPS L1, L2, L5, GLONASS 1, GLONASS 2, Beidou 1 and Beidou 2 frequencies.

Fed by a single RG174 cable for all frequencies, the MP-RTK antenna has an integrated LNA with approximately 37 dB gain thereby offering high gain performance. With a strong magnetic in the base of the antenna, it is ideal for vehicle or non-permanent mounting applications.

Alternatively, if required the MP-RTK antenna element could be housed in the CPx permanent mount enclosure when a through-hole mount solution is required.

For pricing and availability of the MP-RTK antenna, please contact us.

VLP4 antenna integrates 450 LTE GPS WLAN capabilities

Written by EAD Admin on 11th January 2018. Posted in News.

A new version of EAD’s VLP4 antenna integrates 450 LTE GPS WLAN frequencies into one low profile roof-mount antenna. Ideal for LTE 450 and LTE multiband applications, this VLP4 version also offers a 2.4 GHz WLAN element and an active GPS/GLONASS element for positioning.

Fed by three cables, one for LTE450/700-2700 MHz, one for WLAN and one for GPS/GLONASS, the VLP4 is an effective solution for transit applications, trucking and machinery where 4G connectivity alongside positioning and WiFi capabilities is required.

For more information and pricing on this antenna, please contact us here at EAD and we’ll be happy to help you.

For more generic VLP4 information, please visit the product page.

LPO Multiband MIMO antenna announced by EAD

Written by EAD Admin on 17th October 2017. Posted in News.

The LPO Multiband MIMO antenna has been announced by EAD. Offering 2 x LTE, 2 x WiFi and one active GPS/GLONASS antenna element, the LPO is a robust and practical solution for bus, truck, transit and vehicle applications where 5 antennas for multiband communications need to be installed.

With excellent RF performance in an enclosure 140mm in diameter and 80mm in height, the LPO is permanently mounted via a threaded stud and locking nut underneath. Gain figures for LTE are 3-4 dBi and 5 dBi for both 2.4 and 5 GHz WiFi bands.

For more information and availability on the LPO antenna, please contact EAD or your local EAD representative.

LPO – 5 Element MIMO LTE WiFi GNSS antenna

Written by EAD Admin on 17th October 2017. Posted in 5G & LTE/4G Antennas, GPS & GNSS Antennas.

The LPO is a 5 Element MIMO LTE WiFi GNSS antenna suitable for vehicle roof permanent mounting for multi-band tracking and telematics applications. Offering 2 x LTE antenna elements, 2 x dual band WiFi elements and 1 x GPS/GLONASS element, the LPO is a robust, permanent mount multiband antenna idea for telematics, transit and fleet applications where multiple antennas are required.

Mounting via one single point, the LPO does not compromise on performance with LTE elements offering 3-4 dBi gain and the WiFi elements offering 5 dBi gain on both bands.

The LPO is 140mm in diameter and 80mm in height with a threaded stud and locking nut underneath. The cables exit through the middle of the mounting stud.

For more information on the LPO, please contact us or your local EAD distributor.

European customers can purchase small quantities of the LPO antenna via the Connex webshop.

For a single LTE, single WiFi and GPS/GLONASS, why not take a look at the CLWG antenna.

Active GPS Stub Antenna with Right Angle SMA

Written by EAD Admin on 13th October 2017. Posted in News.

The unique GPS-Stubby from EAD is the only active GPS stub antenna with either SMA-Male straight or SMA-Male right angle.

Some GPS-based terminal and devices are not suitable for straight GPS stub antennas. Our GPS-Stubby right angle version solves this problem.

The GPS-Stubby is an active antenna with an integrated LNA (low noise amplifier) to enhance signal reception. Housed in a robust, aesthetically attractive sheath, the antenna is ideal for systems where an embedded internal antenna or a magnetic mount antenna cannot be used.

For customers in Europe, you can purchase small quantities of the GPS-Stubby antenna via the Connex Webshop. For all other requests, please contact your local EAD distributor.

GPS3602 – passive GPS internal ceramic patch antenna

Written by EAD Admin on 4th September 2017. Posted in GPS & GNSS Antennas.

The GPS3602 is a passive GPS internal ceramic patch antenna fed by a microcoax cable and IPEX-terminated (U.FL compatible) cable. The GPS3602 is designed to be integrated into GPS enabled devices and terminals where the GPS module can only accommodate passive GPS antennas (GPS antennas without a LNA Low Noise Amplifier).

The GPS3602 is nicely compact measuring just 20 x 20 x 6mm and offers 1.5 dB at centre frequency.

Other cable lengths and connector configurations are possible, please contact EAD for details.

For active GPS internal ceramic patch antennas, we have the GPS36xx range in which each antenna has a LNA with optional gain figures of 15, 20 and 26 dB.

GPS560 – GPS GLONASS mobile magnetic antenna

Written by EAD Admin on 30th August 2017. Posted in GPS & GNSS Antennas.

The GPS560 is a GPS GLONASS mobile magnetic antenna offering a cost-effective magnetic-mount solution for mobile GNSS applications. It is designed for fleet management, telematics and asset tracking deployments where the antenna should be roof mounted or mounted onto a metal surface or bracket.

Housed in an aesthetically pleasing enclosure, the GPS560 is supplied with 3M RG-174 and SMA-Male connector as standard, but other cable and connector configurations are possible.

The GPS560 antenna has dimensions of 45x45x14.6mm and has a LNA gain of 27 dB

For a GPS only version, we have the GPS460 available in magnetic mount and the GPS450 in adhesive mount options.

GPS36xx – Internal active GPS patch antennas

Written by EAD Admin on 30th August 2017. Posted in GPS & GNSS Antennas.

The GPS36xx is a range of internal active GPS patch antennas with various gain specifications designed for building into GPS-enabled terminals and devices.

The GPS3620 is a compact internal active GPS antenna element designed to be integrated into mobile devices. The GPS3620 is primarily designed for portable tracking devices and compact terminals requiring GPS functionality.

The GPS3620 has dimensions of 20x20x6mm and a LNA gain figure of 20 dB.

The GPS3620 is available with a U.FL compatible or MMCX RA cable/connector configuration. Please contact us for more information on the cable/connector options.

A 15 dB gain version called the GPS3615 and a 26 dB gain version called the GPS3626 also available.

There is a passive version of this called the GPS3602 available.

GPS450 – Mobile GPS window mount antenna

Written by EAD Admin on 25th August 2017. Posted in GPS & GNSS Antennas.

The GPS450 is a mobile GPS window mount antenna. It is an attractive and cost-effective adhesive window-mount solution. It is designed for fleet management, telematics and asset tracking applications where the antenna should be installed within the confines of the vehicle.

As standard the GPS450 is supplied with 3M RG-174 and SMA-Male connector, but other cable length and connector configurations are possible. The antenna is also supplied with an adhesive mount for mounting.

The GPS450 has dimensions of 45x45x14.5mm and has a LNA gain of 25 dB.

The GPS460 is a magnetic mount version of the GPS450 designed for vehicle roof mount applications.

GPS460 – mobile GPS Magnetic mount antenna

Written by EAD Admin on 25th August 2017. Posted in GPS & GNSS Antennas.

The GPS460 is an attractive, cost-effective active GPS magnetic mount antenna antenna. It is designed for fleet management, telematics and asset tracking applications where the antenna should be roof-mounted onto a vehicle.

It is supplied as standard with a 3M RG-174 cable and SMA-Male connector. Other cable lengths and connectors are possible. Please contact us with your requirements.

The GPS460 has dimensions of 45x45x14.6mm and has a LNA gain of 25 dB.

The GPS460 does not support GLONASS functionality. For a GPS/GLONASS version, the GPS560 is a suitable alternative. For a window mount solution, please look at the GPS450 window mount GPS antenna.

GPS-Stubby – robust GPS active stub antenna

Written by EAD Admin on 21st August 2017. Posted in GPS & GNSS Antennas.

The GPS-Stubby antenna is an innovative GPS active stub antenna supplied in a robust sheath and terminated in either a SMA-Male Straight or SMA-Male Right Angle connector. Designed for applications where an internal GPS antenna is unsuitable and where a standard patch antenna with cable is not practical, the GPS-Stubby offers a compact and cost-effective stubby antenna solution.

The SMA-Male right angle version is a unique GPS Stub solution enabling applications where a straight SMA-Male connector would be cumbersome or awkward.

With an integrated LNA, the effective gain of the GPS-Stubby is 26 dB. The GPS-Subby is housed in compact dimensions of 67×18.5mm (dxh).

The GPS-Stubby antenna does not currently support GLONASS.

For low volume requirements, customers in Europe can source the GPS-Stubby from the Connex webshop.

The formal part codes are FGPS35216-SM-ST and FGPS35216-SM-RA.

Tag: GPS

Privacy Settings

Functional