Skip to main content
EAD Antennas logo

Tag: 4G

4G LTE Terminal Antenna

WTR7270 – Portable 4G LTE Terminal Antenna

Written by EAD Admin on . Posted in 5G & LTE/4G Antennas.

The WTR7270 is 4G LTE terminal antenna, a groundplane independent dipole, covering worldwide LTE, 4G, 3G and GSM bands including 700/800/900/1800/2100 and 2600 MHz for LTE, Cellular, GSM and UMTS (3G) operation. It has a robust and discreet injection-moulded cover and comes with SMA-Male swivel joint connector that can lock in three positions. The WTR7270 offers a gain of 1 dBi.

The WTR7270 4G LTE terminal antenna is an ideal solution for LTE and penta-band cellular applications including wireless routers, modems and access points and for telemetry and telematics where comprehensive LTE, cellular, GSM and 3G capability is required. Two WTR7270 antennas can be used together on terminals and routers requiring MIMO or diversity functionality.

The formal part number is FWTR35292-SM-KR. For customers in Europe requiring small quantities, you can purchase the WTR7270 via the Connex webshop.

For a LTE stubby antenna, check out the LTE-Stubby.

5G 4G LTE magnetic antenna

L-Mag – mobile mount 5G 4G LTE magnetic antenna

Written by EAD Admin on . Posted in 5G & LTE/4G Antennas.

The L-Mag is a 5G 4G LTE magnetic antenna operating across the 700-2700/3400-3800 MHz frequency bands and designed for fixed and mobile wireless applications. A compact radiating element housed in a moulded sheath is mounted onto a magnetic base to facilitate 4G/LTE communications including the 700 MHz LTE band, European LTE bands at 800 MHz, 1800 MHz and 2600 MHz and 5G Bands at 3400-3800 MHz.

Measuring just 110mm in overall length with a base diameter of 30mm excluding the cable and connector, the L-Mag is compact, however is large enough to comfortably cover the frequency bands for 5G, LTE, 4G, 3G, GSM and cellular connectivity. As standard, the L-Mag is supplied with a 3M RG174 cable and a SMA-Male connector.

UK customers can order the L-Mag via the Connex webshop.

The formal part code for this part is FLMG35336-SM-3K.

For a 4G terminal antenna, please take a look at the WTR7270 antenna.

4G LTE High Gain Omni

FGO – 4G LTE high gain omni antenna

Written by EAD Admin on . Posted in 5G & LTE/4G Antennas.

The FGO is a 4G LTE high gain omni antenna covering 690-960/1710-2170/2500-2700 i.e. LTE, 4G, 3G, GSM and cellular frequency bands.

With a peak gain of 5dBi across the lower, middle and upper bands respectively, the FGO is unrivalled where a discrete, but high gain antenna is required, especially in 4G access, CCTV, security, metering and remote telemetry applications. The antenna is groundplane independent and can be mounted on a pole or on a wall.

The FGO is supplied with a robust bracket and is terminated in a N-Female connector.

Custom jumper cables can be assembled to the required configuration.

4G LTE outdoor MIMO omni antenna

LMO7270 – 4G LTE outdoor MIMO omni antenna

Written by EAD Admin on . Posted in 5G & LTE/4G Antennas.

The LMO7270 is a 4G LTE outdoor MIMO omni antenna with dual polarised radiating elements. Housed in a durable radome, the LMO7270 antenna is suitable for outdoor applications including leisure marine environments to improve reception of 4G (LTE), 3G and GSM signals, especially for wireless broadband, security and CCTV deployments.

The frequencies supported are 700, 800, 900, 1800, 1900, 2100 and 2600 MHz covering all major 4G, LTE, GSM and 3G frequency bands.

The LMO7270 measures approximately 187mm in height and 106mm at the base. It is available with or without the wall/pole mount bracket and fed by two short pigtail cables, allowing for longer jumper cables such as BWL195, RG240 and RF400 to be connected for specific cable runs.

The LMO7270 antenna is supplied with a gasket and a moulded nut as standard so the antenna can be installed as a permanent, through-hole mount solution to be mounted onto a non-metal surface or enclosure. Alternatively, the antenna can be ordered to include brackets for wall or pole mount. A marine mount adapter for mating to standard 1 inch marine mounts is available.

European customers can order small quantities of the LMO7270  4G LTE outdoor MIMO omni antenna via the Connex webshop.

For a MIMO LTE puck antenna, please take a look at our CMO antenna.

CMO 4G LTE MIMO puck antenna

CMO – 4G LTE MIMO puck antenna

Written by EAD Admin on . Posted in 5G & LTE/4G Antennas.

The CMO is  4G LTE MIMO puck antenna operating at 4G/LTE multiband frequencies from 690-2700 MHz. A permanent, through-hole mount antenna, the CMO has two 4G/LTE/Multiband elements enabling MIMO operation in discreet, robust housing.

With peak gain ranging across the bands from 1 dBi to 3.5 dBi, the CMO offers an effective solution for mobile 4G and LTE MIMO applications offering support for 3G and GPRS services if required.

The CMO mounts via a threaded stud and is held in place by a robust locking nut. In conjunction with the gasket underneath, a waterproof seal against a flat mounting surface can be formed ensuring that the antenna is suited to continuous outdoor deployment. The CMO antenna operates most effectively if it is mounted onto a metal surface, enclosure or bracket. The mounting hole size is 20mm.

Supplied as standard with 2 x RG174 cables, the antenna can be customised with a number of connectors including SMA, TS9, FME, TNC, CRC9.

The CMG antenna is the CMO, but with an added GPS/GLONASS element.

European customers can purchase the CMO antenna via the Connex webshop.

The formal part number for the CMO is FCMO35303. For example, the CMO with 2M cables would be FCMO35303-SMSM-2K.

4G MIMO Blade antenna

MIMO-Blade – 4G LTE MIMO blade antenna

Written by EAD Admin on . Posted in 5G & LTE/4G Antennas.

The MIMO-Blade is a 2 x LTE/4G multiband waterproof MIMO blade antenna designed to complement 4G and LTE routers, modems and gateways in fixed and mobile applications. Housed in a robust, durable cover and IP67 rated cover, the MIMO-Blade is a discreet solution for mounting on non-metal surfaces such as vehicle windows, dashboards, inside kiosks or terminals or in locations outside a vehicle or enclosure.

The MIMO-Blade is supplied with two RG174 cables and these can be specified to customer-required length and choices of connector, SMA-Male, FME-Female and TS9 connectors are popular. The MIMO-Blade antenna is fully IP67 compliant.

Applications that this MIMO antenna is used for include vehicle telematics, vending, kiosks and wireless video. The MIMO-Blade is supplied with removable suction cups for mounting and can also be mounted with adhesive tape, velcro, cable ties or plastic screws.

The MIMO-Blade can be purchased by European customers via the Connex webshop.

For a MIMO LTE omni antenna, take a look at the LMO7270 antenna.

For LTE flexible PCB antenna, the L-Flex is an attractive solution.