Tag: wall

Not sure what antenna you need? Ask EAD.

Written by EAD Admin on 7th September 2026. Posted in News.

If you’re not sure what antenna you need for 4G, 5G, IoT, GNSS, or WiFi applications, talk to EAD. Across our portfolio, we have pole-mount, wall-mount, magnetic mount, rail-mount, surface-mount, enclosure mount and terminal mount antennas.

Typical applications for our antennas include:

Remote water monitoring

Wireless CCTV

Security Systems

Vehicle Telematics

Industrial Telemetry

Utility street cabinets

Leisure marine

We can assist you with making the correct antenna selection for your application. When identifying the correct antenna it is helpful to understand the following:

Frequency / technology
Radio/modem used
Indoor or outdoor
Required cable length
Connector
Mounting method
Application

Armed with this information we will endeavour to offer an antenna that is a good fit for your application from our own portfolio or one from one of our antenna partners.

Please feel free to contact us at sales@ead-ltd.com

LPO6938-4P-WB 5G/4G MIMO outdoor wall/pole omni antenna

Written by EAD Admin on 27th January 2021. Posted in 5G & LTE/4G Antennas.

The LPO6938-4P-WB 5G/4G MIMO compact outdoor omni antenna is designed for pole, wall or enclosure mount installations for 5G / 4G access applications. Based on our leading LPO antenna platform, this antenna is, as standard, supplied on a UV-resistant ASA mounting bracket.

Offering robust RF performance in a compact housing, the LPO6938-4P is ideal for environments where multiple antenna elements are required helping to reduce the number of physical antennas deployed in installations for 5G bonded applications, high bandwidth/ high speed networks, 5G access and high definition video deployments.

The LPO6938-4P-WB 5G/4G MIMO compact outdoor omni antenna in terminated in 4 x SMA-Male pigtails as standard and can be combined with low loss extension cables customised to suit the application. This antenna when mounted correctly on the mounting bracket or enclosure is waterproof to IP67 standard.

For a two port, dual polarised MIMO antenna covering 5G, check out the LMO6138 antenna which for customers in the UK can be purchased via the Connex webshop.

For more information on the LPO6938-4P-WB, please contact us or your local EAD distributor/reseller.

HGO-4G-LTE High Gain Omni Blade Antenna

Written by EAD Admin on 23rd August 2019. Posted in 5G/4G/Cellular Antennas.

The HGO-4G-LTE is a 4G high gain omni blade antenna with 4G Multiband (800/900/1800/2100/2600 MHz – 4G, 3G and GSM) capabilities. It is a 5-6 dBi omni-directional blade antenna with a mounting bracket (it can be pole or wall mounted) comes as standard with a 5M Low Loss cable terminated in a SMA-Male plug connector.

This antenna is omni-directional blade which means that it does not have to be pointed towards the local mast.

Electrical Data

Type              High Gain Omni (Multi Band Dipole Array)
Frequencies 790-960 MHz for GSM 900 and LTE 800
1710-1880 MHz for GSM 1800
1920-2170 MHz for UMTS
2.4 – 2.7 GHz for WLAN and LTE 2600
Impedence     50 Ohm
Radiation Pattern       360° Omnidirectional
Polarization                 Linear Vertical
Gain              5 dBi for GSM 900&1800 and LTE 800
6 dBi for UMTS
5-6 dBi for WLAN and LTE 2600
Max Input Power        20 Watts for GSM 900 and LTE 800
10 Watts for GSM 1800 & UMTS
6 Watts for WLAN & LTE 2600
Cable              White Low Loss 5m or other length on request
Connector       SMA-male (other type on request)

Mechanical Data
Sheath Material Thermoplastic UV Stabilized Grey RAL 7035,
Brackets              Galvanized steel hardware
Operating Temp -20°C to + 80°C
Dimensions          335 x 166 x 144 mm with bracket
Weight                 350 gr
Installation           Mast Diameter 25-42 mm with U-bolt (included)
Wall: Mounting screws (not included)

For small quantity requirements, you can order the HGO-4G-LTE from the Connex webshop if you based in the UK. For other territories, please contact us for pricing.

For a 4G LTE directional antenna, you could consider the SMP-5G or the SMP-MIMO antenna.

DMO8684 – 868 MHz dual mount omni antenna

Written by EAD Admin on 21st May 2018. Posted in 169 / 433 / 868 / 915 Antennas.

The DMO8684 (DMO – Dual Mount Omni) has been designed for continuous outside use and can be either pole or wall-mount using the same innovative bracket. Ideal for remote sites using ISM band frequencies including IoT networks using LoRa and Sigfox, this new 868 MHz dual mount omni antenna is a flexible solution enabling fast and clean installations.

With 4.3 dBi peak gain, the DMO8684 offers exceptional performance in a fibreglass sheath that measures approximately 500mm in length. Terminated in a N-Female connector, this outdoor 868 MHz omni antenna can be used with a variety of jumper cable types to tailor cable lengths and connectors to each individual application. It can be used with cables such as BWL195, RF240 and RF400.

The zinc plated mounting bracket supplied with the DMO8684 antenna allows for mast/pole mount and can be reversed and used for wall-mounting

An alternative 868 MHz 5 dBi Omni with 5M cable is also available – WMO8685.

WCO-433-WMB – 433 MHz compact outdoor wall mount antenna

Written by EAD Admin on 4th September 2017. Posted in 169 / 433 / 868 / 915 Antennas.

The WCO-433-WMB is a 433 MHz compact outdoor wall mount antenna based on a durable 1/4 Wave 433 MHz antenna designed for outdoor deployments. It is supplied as a wall-mount option and mounted on a sturdy L-Bracket which functions as the groundplane for the antenna. It is possible to use the WCO-433 antenna to mount directly onto an enclosure, please contact EAD for this type of application.

Housed in the robust, waterproof, UV-resistant and flame retardent WCO Sheath, the antenna mounts onto a the L-bracket by way of N-Female connector and is held in place with a nut and washer. The construction of this antenna is very durable and also very compact making it ideal for outdoor deployments for a variety of ISM-band applications including security and telemetry applications.

A jumper cable with N-Male should be used to connect the WCO-433 to the radio.

This antenna design can be customised to different frequencies in the 380-512 MHz band including TETRA 380-400 MHz, 410-430 MHz or 450 MHz.

The WCO-2400-WMB is a similar antenna but operating at 2.4 GHz.

WCO-2400-WMB – compact outdoor WLAN wall mount antenna

Written by EAD Admin on 4th September 2017. Posted in 2.4 & 5.8 GHz Antennas.

The WCO-2400-WMB is a compact outdoor WLAN wall mount antenna designed for continuous outdoor deployment. Housed in a flame-retardant, UV-resistant sheath, the WCO antenna is mounted onto a stainless steel L-bracket for permanent outdoor mounting.

The WCO-2400-WMB antenna offers 2 dBi gain across the 2.4 GHz and 5 GHz bands, the WCO-2400-WMB is fed by a N-Female connector underneath and mates to custom jumper cables as the installation requires. The cables could be short extension cables or low loss jumper cables for longer cable runs.

Other frequencies are available in the same form factor – 433 MHz, 868 MHz and pentaband GSM/3G.

As an alternative, you could consider the CPW 2.4 / 5 GHz puck antenna on a wall-mount L-bracket.

FGO – 4G LTE high gain omni antenna

Written by EAD Admin on 21st August 2017. Posted in 5G & LTE/4G Antennas.

The FGO is a 4G LTE high gain omni antenna covering 690-960/1710-2170/2500-2700 i.e. LTE, 4G, 3G, GSM and cellular frequency bands.

With a peak gain of 5dBi across the lower, middle and upper bands respectively, the FGO is unrivalled where a discrete, but high gain antenna is required, especially in 4G access, CCTV, security, metering and remote telemetry applications. The antenna is groundplane independent and can be mounted on a pole or on a wall.

The FGO is supplied with a robust bracket and is terminated in a N-Female connector.

Custom jumper cables can be assembled to the required configuration.