The LPO-Max 5G antenna can be wall, pole or rail-mounted via the LPO bracket. Using the LPO bracket for pole or rail-mounting, the LPO-Max can be installed either vertically or horizontally.
Ideal for leisure marine, wireless CCTV and security, commercial and industrial 5G access applications, the LPO-Max is a wideband, high performance omni antenna offering 4 antenna ports housed in one UV-resistant ASA radome.
For more information on our LPO-Max 5G antenna, please contact us.
The RO600/71NFKIT 5G/4G Radome Omni Antenna from Pulse is ideal for many applications including remote monitoring, private cellular networks & IOT applications. Boasting average peak gains across the bands of 617-960 MHz 2.5dBi, 1450-4200 MHz 4.0dBi and 4400-7125 MHz 4.3dBi, this antenna offers optimal performance over a wide frequency range.
Fabricated using a rugged design, with a omni-directional radiation pattern and DC-grounded element, the antenna includes Band 71 617-698MHz) and CBRS Bands 42 and 48 (3400-3700MHz). Designed to offer best in class reliability and throughput, the RO600/71NFKIT will allow users to take advantage of the high bandwidth, low-latency capabilities 5G offers.
Please contact us for pricing and lead times for the RO600/71NFKIT 5G/4G Radome Omni.
For a low profile, mobile 5G antenna check out the LP600-71DMN antenna.
The LPO6938-4P-WB 5G/4G MIMO compact outdoor omni antenna is designed for pole, wall or enclosure mount installations for 5G / 4G access applications. Based on our leading LPO antenna platform, this antenna is, as standard, supplied on a UV-resistant ASA mounting bracket.
Offering robust RF performance in a compact housing, the LPO6938-4P is ideal for environments where multiple antenna elements are required helping to reduce the number of physical antennas deployed in installations for 5G bonded applications, high bandwidth/ high speed networks, 5G access and high definition video deployments.
The LPO6938-4P-WB 5G/4G MIMO compact outdoor omni antenna in terminated in 4 x SMA-Male pigtails as standard and can be combined with low loss extension cables customised to suit the application. This antenna when mounted correctly on the mounting bracket or enclosure is waterproof to IP67 standard.
For a two port, dual polarised MIMO antenna covering 5G, check out the LMO6138 antenna which for customers in the UK can be purchased via the Connex webshop.
For more information on the LPO6938-4P-WB, please contact us or your local EAD distributor/reseller.
The DMO8684 (DMO – Dual Mount Omni) has been designed for continuous outside use and can be either pole or wall-mount using the same innovative bracket. Ideal for remote sites using ISM band frequencies including IoT networks using LoRa and Sigfox, this new 868 MHz dual mount omni antenna is a flexible solution enabling fast and clean installations.
With 4.3 dBi peak gain, the DMO8684 offers exceptional performance in a fibreglass sheath that measures approximately 500mm in length. Terminated in a N-Female connector, this outdoor 868 MHz omni antenna can be used with a variety of jumper cable types to tailor cable lengths and connectors to each individual application. It can be used with cables such as BWL195, RF240 and RF400.
The zinc plated mounting bracket supplied with the DMO8684 antenna allows for mast/pole mount and can be reversed and used for wall-mounting
An alternative 868 MHz 5 dBi Omni with 5M cable is also available – WMO8685.
The FGO is a 4G LTE high gain omni antenna covering 690-960/1710-2170/2500-2700 i.e. LTE, 4G, 3G, GSM and cellular frequency bands.
With a peak gain of 5dBi across the lower, middle and upper bands respectively, the FGO is unrivalled where a discrete, but high gain antenna is required, especially in 4G access, CCTV, security, metering and remote telemetry applications. The antenna is groundplane independent and can be mounted on a pole or on a wall.
The FGO is supplied with a robust bracket and is terminated in a N-Female connector.
Custom jumper cables can be assembled to the required configuration.
